Bize ulaşmak için formu doldurmanız yeterli. Bilgileriniz bize ulaşır ulaşmaz yetkilimiz sizinle iletişime geçecektir.
Ailemize hoş geldiniz.
-
COLD ROLLING MILLS
The Aluminium materials which are produced by hot mill or continuous caster and following numerous rolling actions are processed in Aluminium Cold Rolling Mills. VIG Makina mainly involved to the many cold rolling mill modernization projects and manufactured afterwards its own design cold mill.
Technical Specifications
Material to be rolled
• Strip thickness range from 8 mm - 0.2 mm
• Strip width range from 600 mm to 2200 mm
• Coil weight up to 25 ton
Equipment Parameter
• Rolling speed up to 1200 m/min
• Rolling force 7000 – 20000 kN
• Reduction: 30% - 60%
• Mill power up to 5000 kW
• AFC system for automatic flatness control
• AGC system
• Thickness Gauge
• Spraying system
HOT ROLLING MILLS
Aluminium slab is heated in preheating furnace before the slab is brought to break-down mill. The slab thickness is dramatically reduced and passed on to the finishing mill to make a coil. VIG Makina supplies the hot rolling mills with the following specifications.
Technical Specifications
Material to be rolled
• Slab thickness range from 300 mm to 600 mm
• Strip width range from 600 mm to 2200 mm
• Strip gauge from 10 mm to 3 mm
• Coil weight up to 25 ton
• Rolling speed up to 180 m/min
• Mill power up to 7000 kW
• Loading Force up to 35000 kN
Equipment Parameter
• AC frequency drive or DC drive for main motors and coiler motors.
• Electro-mechanical screw-down and fine hydraulic adjusting
• Thickness gauge
• Sectional lubrication and cooling spraying
• Positive and negative roll bending system
• Efficient roll brushes
FOIL ROLLING MILLS
• Universal foil rolling mills for the strip thickness range of 0.7 mm - 6 μm and low tonnages
• Foil roughing mills with strip thicknesses between 0.7 mm - 0.02 mm
• Foil intermediate mills with strip thicknesses between 0.08 mm - 0.01 mm
• Foil finishing mills with strip thicknesses between 0.05 mm - 0.006 mm
Technical Specifications
Material to be rolled
• Strip thickness range from 0.7 m-2x0.006 mm
• Strip width range up to 2150 mm
• Rolling speeds up to 1500 m/min
• Coil weight up to 25 ton
Equipment Parameter
• Mill power up to 1500 kW
• Loading force up to 8000 kN
• Hydraulic AGC system
• AFC system for automatic flatness control
• Roll cooling systems
• Mill automation system
Bize ulaşmak için formu doldurmanız yeterli. Bilgileriniz bize ulaşır ulaşmaz yetkilimiz sizinle iletişime geçecektir.
Ailemize hoş geldiniz.